1, Supports long press on the button of the switch 3 seconds to turn on the light of the lullaby 1 light 1 fashion, while the music plays.
2 switching, briefly press the button to change the mode light.
3, If you only have to replace the hypnotic, song, press on the remote control or the host to replace the previous or next song.
4, during the insertion of the TF card, and the external source, the Lullaby will stop automatically.
5, When inserting the external sources, the host and remote of the previous and next song can not be used.
6, press the H1/H2/H4 For The timer settings of the host, automatic shut off after 1 hour, 2 hours, 4 hours.
7, press the timer off from the remote control to cancel the timer function. 8, Long press the button to turn off.
Size: 12.6 * 12.6 * 10.5 cm
Rated voltage: DC 5 V/1 A
Speaker: 4 & # x3 a9; 3 W
USB cable length: 1.2 m
Audio cable length: 0.6 m
Motor: 5 V/13
Mateial: ABS/PS/Metal/Electronic Components
Color: Black | White
1.Do not allow children under 6 years of age to use alone.
2. Please do not put the battery positive and negative antichargée, if it is installed on the back, the remote control will be hot, you will not be able to use the remote control and may cause burns.
3. This product is not waterproof, no storage or use in place of wet or high temperature.
4.How to adjust the projection angle: You need to push the panel to the bottom to change the angle, please note that it can be adjusted to 45 °.
cat1 rhd White Sea Projection Lamp 7Mode with Music Player and Remote Control B07587L873